Platform compatibility tags#

Platform compatibility tags allow build tools to mark distributions as being compatible with specific platforms, and allows installers to understand which distributions are compatible with the system they are running on.


The tag format is {python tag}-{abi tag}-{platform tag}.

python tag

„py27“, „cp33“

abi tag

„cp32dmu“, „none“

platform tag

„linux_x86_64“, „any“

For example, the tag py27-none-any indicates compatibility with Python 2.7 (any Python 2.7 implementation) with no abi requirement, on any platform.

The wheel built package format includes these tags in its filenames, of the form {distribution}-{version}(-{build tag})?-{python tag}-{abitag}-{platform tag}.whl. Other package formats may have their own conventions.

Any potential spaces in any tag should be replaced with _.

Python Tag#

The Python tag indicates the implementation and version required by a distribution. Major implementations have abbreviated codes, initially:

  • py: Generic Python (does not require implementation-specific features)

  • cp: CPython

  • ip: IronPython

  • pp: PyPy

  • jy: Jython

Other Python implementations should use

The version is py_version_nodot. CPython gets away with no dot, but if one is needed the underscore _ is used instead. PyPy should probably use its own versions here pp18, pp19.

The version can be just the major version 2 or 3 py2, py3 for many pure-Python distributions.

Importantly, major-version-only tags like py2 and py3 are not shorthand for py20 and py30. Instead, these tags mean the packager intentionally released a cross-version-compatible distribution.

A single-source Python 2/3 compatible distribution can use the compound tag py2.py3. See Compressed Tag Sets, below.

ABI Tag#

The ABI tag indicates which Python ABI is required by any included extension modules. For implementation-specific ABIs, the implementation is abbreviated in the same way as the Python Tag, e.g. cp33d would be the CPython 3.3 ABI with debugging.

The CPython stable ABI is abi3 as in the shared library suffix.

Implementations with a very unstable ABI may use the first 6 bytes (as 8 base64-encoded characters) of the SHA-256 hash of their source code revision and compiler flags, etc, but will probably not have a great need to distribute binary distributions. Each implementation’s community may decide how to best use the ABI tag.

Platform Tag#

Basic platform tags#

In its simplest form, the platform tag is sysconfig.get_platform() with all hyphens - and periods . replaced with underscore _. Until the removal of distutils in Python 3.12, this was distutils.util.get_platform(). For example:

  • win32

  • linux_i386

  • linux_x86_64


The simple scheme above is insufficient for public distribution of wheel files to Linux platforms, due to the large ecosystem of Linux platforms and subtle differences between them.

Instead, for those platforms, the manylinux standard represents a common subset of Linux platforms, and allows building wheels tagged with the manylinux platform tag which can be used across most common Linux distributions.

The current standard is the future-proof manylinux_x_y standard. It defines tags of the form manylinux_x_y_arch, where x and y are glibc major and minor versions supported (e.g. manylinux_2_24_xxx should work on any distro using glibc 2.24+), and arch is the architecture, matching the value of sysconfig.get_platform() on the system as in the «simple» form above.

The following older tags are still supported for backward compatibility:

  • manylinux1 supports glibc 2.5 on x86_64 and i686 architectures.

  • manylinux2010 supports glibc 2.12 on x86_64 and i686.

  • manylinux2014 supports glibc 2.17 on x86_64, i686, aarch64, armv7l, ppc64, ppc64le, and s390x.

In general, distributions built for older versions of the specification are forwards-compatible (meaning that manylinux1 distributions should continue to work on modern systems) but not backwards-compatible (meaning that manylinux2010 distributions are not expected to work on platforms that existed before 2010).

Package maintainers should attempt to target the most compatible specification possible, with the caveat that the provided build environment for manylinux1 and manylinux2010 have reached end-of-life meaning that these images will no longer receive security updates.

The following table shows the minimum versions of relevant projects to support the various manylinux standards:















>=3.3.0 [1]


The musllinux family of tags is similar to manylinux, but for Linux platforms that use the musl libc rather than glibc (a prime example being Alpine Linux). The schema is musllinux_x_y_arch, supporting musl x.y and higher on the architecture arch.

The musl version values can be obtained by executing the musl libc shared library the Python interpreter is currently running on, and parsing the output:

import re
import subprocess

def get_musl_major_minor(so: str) -> tuple[int, int] | None:
    """Detect musl runtime version.

    Returns a two-tuple ``(major, minor)`` that indicates musl
    library's version, or ``None`` if the given libc .so does not
    output expected information.

    The libc library should output something like this to stderr::

        musl libc (x86_64)
        Version 1.2.2
        Dynamic Program Loader
    proc =[so], stderr=subprocess.PIPE, text=True)
    lines = (line.strip() for line in proc.stderr.splitlines())
    lines = [line for line in lines if line]
    if len(lines) < 2 or lines[0][:4] != "musl":
        return None
    match = re.match(r"Version (\d+)\.(\d+)", lines[1])
    if match:
        return (int(, int(
    return None

There are currently two possible ways to find the musl library’s location that a Python interpreter is running on, either with the system ldd command, or by parsing the PT_INTERP section’s value from the executable’s ELF header.


The tags are used by installers to decide which built distribution (if any) to download from a list of potential built distributions. The installer maintains a list of (pyver, abi, arch) tuples that it will support. If the built distribution’s tag is in the list, then it can be installed.

It is recommended that installers try to choose the most feature complete built distribution available (the one most specific to the installation environment) by default before falling back to pure Python versions published for older Python releases. Installers are also recommended to provide a way to configure and re-order the list of allowed compatibility tags; for example, a user might accept only the *-none-any tags to only download built packages that advertise themselves as being pure Python.

Another desirable installer feature might be to include «re-compile from source if possible» as more preferable than some of the compatible but legacy pre-built options.

This example list is for an installer running under CPython 3.3 on a linux_x86_64 system. It is in order from most-preferred (a distribution with a compiled extension module, built for the current version of Python) to least-preferred (a pure-Python distribution built with an older version of Python):

  1. cp33-cp33m-linux_x86_64

  2. cp33-abi3-linux_x86_64

  3. cp3-abi3-linux_x86_64

  4. cp33-none-linux_x86_64*

  5. cp3-none-linux_x86_64*

  6. py33-none-linux_x86_64*

  7. py3-none-linux_x86_64*

  8. cp33-none-any

  9. cp3-none-any

  10. py33-none-any

  11. py3-none-any

  12. py32-none-any

  13. py31-none-any

  14. py30-none-any

  • Built distributions may be platform specific for reasons other than C extensions, such as by including a native executable invoked as a subprocess.

Sometimes there will be more than one supported built distribution for a particular version of a package. For example, a packager could release a package tagged cp33-abi3-linux_x86_64 that contains an optional C extension and the same distribution tagged py3-none-any that does not. The index of the tag in the supported tags list breaks the tie, and the package with the C extension is installed in preference to the package without because that tag appears first in the list.

Compressed Tag Sets#

To allow for compact filenames of bdists that work with more than one compatibility tag triple, each tag in a filename can instead be a „.“-separated, sorted, set of tags. For example, pip, a pure-Python package that is written to run under Python 2 and 3 with the same source code, could distribute a bdist with the tag py2.py3-none-any. The full list of simple tags is:

for x in pytag.split('.'):
    for y in abitag.split('.'):
        for z in archtag.split('.'):
            yield '-'.join((x, y, z))

A bdist format that implements this scheme should include the expanded tags in bdist-specific metadata. This compression scheme can generate large numbers of unsupported tags and «impossible» tags that are supported by no Python implementation e.g. «cp33-cp31u-win64», so use it sparingly.


What tags are used by default?

Tools should use the most-preferred architecture dependent tag e.g. cp33-cp33m-win32 or the most-preferred pure python tag e.g. py33-none-any by default. If the packager overrides the default it indicates that they intended to provide cross-Python compatibility.

What tag do I use if my distribution uses a feature exclusive to the newest version of Python?

Compatibility tags aid installers in selecting the most compatible build of a single version of a distribution. For example, when there is no Python 3.3 compatible build of beaglevote-1.2.0 (it uses a Python 3.4 exclusive feature) it may still use the py3-none-any tag instead of the py34-none-any tag. A Python 3.3 user must combine other qualifiers, such as a requirement for the older release beaglevote-1.1.0 that does not use the new feature, to get a compatible build.

Why isn’t there a . in the Python version number?

CPython has lasted 20+ years without a 3-digit major release. This should continue for some time. Other implementations may use _ as a delimiter, since both - and . delimit the surrounding filename.

Why normalise hyphens and other non-alphanumeric characters to underscores?

To avoid conflicting with the . and - characters that separate components of the filename, and for better compatibility with the widest range of filesystem limitations for filenames (including being usable in URL paths without quoting).

Why not use special character <X> rather than . or -?

Either because that character is inconvenient or potentially confusing in some contexts (for example, + must be quoted in URLs, ~ is used to denote the user’s home directory in POSIX), or because the advantages weren’t sufficiently compelling to justify changing the existing reference implementation for the wheel format defined in PEP 427 (for example, using , rather than . to separate components in a compressed tag).

Who will maintain the registry of abbreviated implementations?

New two-letter abbreviations can be requested on the python-dev mailing list. As a rule of thumb, abbreviations are reserved for the current 4 most prominent implementations.

Does the compatibility tag go into METADATA or PKG-INFO?

No. The compatibility tag is part of the built distribution’s metadata. METADATA / PKG-INFO should be valid for an entire distribution, not a single build of that distribution.

Why didn’t you mention my favorite Python implementation?

The abbreviated tags facilitate sharing compiled Python code in a public index. Your Python implementation can use this specification too, but with longer tags. Recall that all «pure Python» built distributions just use py.

Why is the ABI tag (the second tag) sometimes «none» in the reference implementation?

Since Python 2 does not have an easy way to get to the SOABI (the concept comes from newer versions of Python 3) the reference implementation at the time of writing guesses «none». Ideally it would detect «py27(d|m|u)» analogous to newer versions of Python, but in the meantime «none» is a good enough way to say «don’t know».


  • February 2013: The original version of this specification was approved through PEP 425.

  • January 2016: The manylinux1 tag was approved through PEP 513.

  • April 2018: The manylinux2010 tag was approved through PEP 571.

  • July 2019: The manylinux2014 tag was approved through PEP 599.

  • November 2019: The manylinux_x_y perennial tag was approved through PEP 600.

  • April 2021: The musllinux_x_y tag was approved through PEP 656.